Other Topic Library Versions

Replace CPU carrier module

Do this task if installing K2-XDP2-CPU-FK on a K2 Summit system.
Note: Do not attempt to replace the CPU carrier module on a K2 Solo Media Server. K2-XDP2-CPU-FK does not apply to K2 Solo Media Server.
  1. Shutdown the K2 Summit system.
  2. Disconnect all power cables from the K2 Summit system.
  3. Press the power button on the K2 Summit system to drain off power from boards.
  4. Remove any cables connected to the CPU carrier module.
  5. Replace the current CPU carrier module with the new CPU carrier module.
  6. Reconnect cables to the CPU carrier module.
  7. Reconnect power cables.
Next, do one of the following:
  • If you are installing K2-XDP2-V9-FK on a K2 Summit 3G system with mSATA system drive, skip ahead and reimage.
  • If you are installing K2-XDP2-V9-FK on a K2 Summit/Solo system with CompactFlash system drive, replace the CompactFlash boot media with the new larger 16GB CF.

Copyright © 2019 Grass Valley Canada. All rights reserved. K2 Summit 9.8 gvtp_20190519_03:02:01