Other Topic Library Versions

Restore settings after generic reimage

Do this task for both software and CPU carrier module upgrade kits.

Settings must be saved using ssave.bat before reimaging the K2 Summit/Solo system, and the reimage (Acronis) process must be complete.

Note: Do not attempt to use a single Recovery Flash Drive on multiple systems. This can overwrite saved settings and lose the ability to restore settings on one or more systems. Also, software licensing requires one Recovery Flash Drive for each system.
  1. If you have not already done so, start up the K2 Summit/Solo system and log on with administrator privileges.
  2. Connect the USB Recovery Flash Drive to a USB port on the K2 Summit/Solo system.
  3. From the USB Recovery Flash Drive, run the following and wait for the process to complete:

    Tools\SaveRestoreScripts\srestore.bat

Next, restore network configuration.


Copyright © 2019 Grass Valley Canada. All rights reserved. K2 Summit 9.8 gvtp_20190519_03:02:01