Other Topic Library Versions

Final steps for DynoZoom upgrade

  • On the K2 Summit system, Embedded Security must not be in Update Mode. Embedded Security Manager must report Enabled.
  1. When the K2 Summit 3G system is fully configured, licensed, and operational, create a disk image and store it on the USB Recovery Flash Drive. Refer to the K2 product's service procedures.
  2. Disconnect the USB Recovery Flash Drive and store it in the front bezel assembly.
The upgrade process is complete for the following upgrade kits:
  • K2-DYNOZOOM-FK
Refer to related topics in the "Using K2 Dyno S Replay Controller" section of the K2 Dyno Topic Library to configure and use the DynoZoom system.

Copyright © 2019 Grass Valley Canada. All rights reserved. K2 Summit 9.8 gvtp_20190519_03:02:01