Other Topic Library Versions

Configure Define Server Roles page - Redundant K2 SAN server A and server B



  1. Enter the name for the K2 Media Server, as currently configured on the machine.
  2. Enter the name or IP address of the Ethernet switch, as currently configured on the switch, to which the K2 Media Server is connected.
  3. Select all roles, except as follows: If the K2 SAN has one or more optional NH servers, then FTP traffic should go to the NH server, not the K2 Media Server you are now configuring. In this case, do not select the FTP server role or the NAS server role
  4. Click Next.

The Software Configuration page opens.


Copyright © 2019 Grass Valley Canada. All rights reserved. K2 Summit 9.8 gvtp_20190519_03:02:01