Other Topic Library Versions

RAID drive numbering first generation K2 Summit system

In the first generation K2 Summit system, internal RAID drives are numbered as follows. This numbering is displayed in Storage Utility. You cannot see the labeling on the K2 Summit Production Client chassis RAID drive when you remove the fan module.



Drive numbering Explanation
Disk 0 When configured as RAID 1, these two RAID drives make up LUN 0.
Disk 1
Disk 2 When configured as RAID 1, these two RAID drives make up LUN 1.
Disk 3
Disk 4 When configured as RAID 1, these two RAID drives make up LUN 2.
Disk 5
Disk 6 When configured as RAID 1, these two RAID drives make up LUN 3.
Disk 7

When drives are configured as RAID 0, each drive is considered its own LUN. As such, the order of LUNs and drive numbers as displayed in Storage Utility does not always correlate with the position of drives in the chassis.


Copyright © 2019 Grass Valley Canada. All rights reserved. K2 Summit 9.8 gvtp_20190519_03:02:01