Super Slo-Mo requirements and restrictions
This feature is part of the ChannelFlex Suite, which requires the AppCenter Elite license. This feature also requires the HD license.
- Phase 1, Phase 2, and Phase 3 inputs must be locked and phase aligned with each other.
- Phase 1, Phase 2, and Phase 3 must be connected to a channel’s SDI IN1, SDI IN2, and SDI IN3 respectively.
- You cannot change the 2x/3x/6x configuration while recording is underway.
- Loss of any phase input results in black for that phase of video in the clip.
- Super Slo-Mo clips are HD and therefore the Super Slo-Mo feature requires the HD license.
- When recording a Super Slo-Mo clip, no audio and ancillary data tracks are created.
- Super Slo-Mo cameras in the following list are supported:
- When using 6X SSM or UHD4K camera systems, verify that 3G signal cables are used between the XCU and K2 Summit system inputs.
- When exporting a 2x, 3x, or 6x Super Slo-Mo clip, and MOV (QuickTime) file types do not retain the original Super Slo-Mo timecode information. Therefore upon import, the timecode numbers will no longer match the video material.
- Stream/Import/Export of a Super Slo-Mo clip is not supported with K2 systems at a 3.x version of software.
- The maximum continuous record length for a Super Slo-Mo clip is 24 hours.
- This feature is not compatible with TimeDelay.
- One or more Super Slo-Mo channels can be a part of an AppCenter channel gang, but the “Record/play same clip on all channels of Gang” feature is not available for that gang.
- 6x Super Slow Motion camera support is not available on K2 Solo.
- Requires configuration of the RTIO value in Storage Utility to improve performance.