Other Topic Library Versions

Changing the timecode source



To change the timecode source:

  1. Click on the channel whose timecode you want to specify.
  2. Select Control | Options. The Options dialog box displays.
  3. Timecode tab.
  4. Choose a timecode source, then click OK.
    Timecode Source Description
    AncVITC Available on HD channels only. Timecode is read from ancillary VITC.
    VITC Available on SD channels only. Timecode is read from the VITC input for the channel.
    LTC Available on HD/SD channels. Timecode is read from the LTC input for the channel.
    AncLTC Available on HD channels only. Timecode is read from ancillary LTC.
    Time of Day Available on HD or SD recordings. Time of Day is an internal generator. You can select either LTC feeds or Windows system clock as the clock source to drive the generator. LTC feeds can be from Channels 1, 2, 3, or 4.
    Start Time Available in HD or SD. When Start Time is selected, you can specify the timecode to use when the recording starts. The drop frame option is enabled when the system timing is set to the 525 line standard (NTSC). Drop frame timecode allows the generator to operate as an accurate clock.

Copyright © 2019 Grass Valley Canada. All rights reserved. K2 Summit 9.8 gvtp_20190519_03:02:01