Adding an Alarm Publication Lookup Location
REQUIREMENT: |
Before beginning this procedure, make sure you have opened the iControl—Lookup location page for the Application Server that is running the Densité, Imagestore, or other service you wish to publish to remote GSMs ( click HERE). |
1. On the iControl—Lookup location page, under Alarm publication, type one of the following:
• the IP address of an Application Server on a remote subnet that is running a GSM
• the IP address of an Application Server on a remote subnet that is running a lookup service
NOTE: Use of the Name field to indicate the Application Server’s host name is optional. |
2. Click Add lookup.
System Response: The address appears in the Alarm publication lookup table.
[ Graphic ]
3. Restart the specific service (e.g. Densité Manager) that you wish to publish to the remote GSM, or restart iControl to publish all services to the remote GSM (
click HERE).