EDIUS 7 Online Help
Reference ManualHardware Setup Guide
Installation Manual
User Guide
This section explains how to change the project settings during the editing operation.
You can change project settings while editing by switching project presets.
To create a new project preset or change the existing project preset settings, use [Application] in [System Settings] → [Project Preset].
Click [Settings] on the menu bar, and click [Project Settings].
Change the project settings by modifying the detailed settings of an existing project preset.
The settings of the original preset will not be changed if you change the project settings of a project you are currently editing.
To create a new project preset or change the existing project preset settings, use [Application] in [System Settings] → [Project Preset].
When changing the settings for [TC preset], [TC Mode], [Total Length], and [Channel map] in the project settings while editing a project, the change is not reflected in the created sequence. Change the settings of the created sequence in the [Sequence settings] dialog box for each sequence.
Click [Settings] on the menu bar, and click [Project Settings].
The [Project Settings] (Detailed Settings) dialog box appears.
[Project Settings] (Detailed Settings) Dialog Box
You can change the settings of the sequence settings in the [Sequence settings] dialog box.
The [Sequence settings] dialog box appears.
[Sequence settings] Dialog Box
Click [Settings] on the menu bar, and click [Sequence settings].
Right-click the sequence tab, and click [Sequence Settings].
Right-click a sequence clip in the bin, and click [Sequence Settings].
[Sequence name]
|
Enter the name of the sequence. |
[TC preset]
|
Set the start timecode of the timeline. |
[TC Mode]
|
When NTSC has been selected for the project setting, select either drop frame or non drop frame timecode display. |
[Total Length]
|
Set the total length of the timeline of sequence by directly entering the value. When the timeline exceeds this length, the color of the timeline section over the limit changes. |
[Preserve Ancillary data]
|
Check this item to set the sequence where ancillary data is to be preserved. |
[Channel map]
|
Set audio output channel for each track. |