EDIUS 7 Online Help
Reference ManualHardware Setup Guide
Installation Manual
User Guide
Correct the camera shake by image processing.
Analysis of the video motion of the clip starts in the background.
Select a clip on the timeline. Select [Stabilizer] in the [Effect] palette, and click [Add to Timeline].
Select a clip on the timeline. Right-click [Stabilizer] in the [Effect] palette, and click [Add to Timeline].
Select [Stabilizer] in the [Effect] palette, right-drag it to the clip on the timeline, and click [Add] or [Replace].
For the part where analysis is completed, the camera shake correction is performed on the spot during playback. Change the camera correction setting after step 4, if necessary.
The [Video Stabilizer] dialog box appears.
[Smoothness]
|
Move the slider to adjust the smoothness level of the video motion. Items set to [Off] are not corrected. [Translate]
Adjust correction level for vertical and horizontal shake. [Scale]
Adjust correction level for zoom-in and zoom-out shake. [2D Rotate]
Adjust correction level for rotation shake. [3D Rotate]
Adjust correction level for perspective shake. [Rolling Shutter]
Adjust correction level for distortion of the rolling shutter. |
[Auto Trimming]
|
Check this item to enlarge the video automatically in order not to make a gap at the edge of the video after correcting the video. You can also enter a value for enlargement factor. |
[Preview]
|
Display the corrected video on the entire screen or at the left/right/upper/lower screen, and compare with the original video. Click the button to select where to display the video. You can enter a value for the ratio to display the corrected video against the entire screen. |