Verify and load Build
- On both Nodes, use down arrow keys to select ATEN Virtual CDROM then press [Enter].
-
Verify Node 2 down arrow keys work. If not, then it's a timing issue. Perform the
following:
- Click on the Chrome window for Node 2.
- Select Remote Control / Launch SOL which launches Java applet.
- In lower left corner: Keep then click once to run the Java applet and select Continue | Run | Yes
- DON’T PRESS ENTER.
- Press down arrow key to highlight VS-series (Console, auto-detected boot drive).
-
Within 3 seconds of each other, use arrow keys to select
VS-series (Console, auto-detected boot drive) then press
[Enter].
Node 1 will run off bunch of commands, Node 2 will show ‘Loading initrd.img…..ready’.
The process will take up to 60-90 minutes and looks like stalled several times. Be patient and do other things while waiting for the process to complete.