Designer Installation and Configuration

The CommandCenter Designer application is installed with the initial installation of CommandCenter. You need to configure it before using the application:
  • From the CommandCenter Configuration menu, select Configuration.
  • Click the CCLink tab. The CCLink dialog displays:

  • Select the checkbox to Enable Client Connections.
  • Enter a Multicast address. The address must start with 239 (i.e. 239.1.1.1)
  • Leave the other parameters at the default unless otherwise required.

© 2014 Grass Valley USA, LLC. All rights reserved. Grass Valley is a registered trademark of GVBB Holdings S.a.r.l.