You can play back or move sources in individual frame units using the operation buttons on the Player.
Playing Back with Recorder Operation Buttons
1) Click [Play] on the Player.
Playback starts on the Player.
2) Click [Stop] on the Player.
Playback stops.
|
(1) |
[Stop] |
Stop playback. [K], [Shift] + [↓] |
|
(2) |
[Review] |
Rewind a source. Each click switches the playback speed in the reverse direction between 4 times and 12 times. [J] *1 |
|
(3) |
[Previous Frame] |
Each click rewinds one frame at a time in the reverse direction. Keeping this button clicked plays back the source at the same speed in the reverse direction. In the case of deck operation, rewind is performed one frame at a time. [←] |
|
(4) |
[Play] |
Play back the source in the forward direction. When this button is clicked during playback, playback pauses. Click again to restart playback. [Enter], [Space] |
|
(5) |
[Next Frame] |
Each click forwards one frame at a time in the forward direction. Keeping this button clicked plays back the source at the same speed in the forward direction. In the case of deck operation, forwarding is performed one frame at a time. [→] |
|
(6) |
[Fast Forward] |
Fast forward playback. Each click switches the fast forward playback speed between 4 times and 12 times. [L] *2 |
|
(7) |
[Loop] *3 |
Repeatedly play back between In and Out points. If no In point is set, the source is repeatedly played back from the beginning, or if no Out point is set, the source is repeatedly played back to the end. If In and Out points have been set for audio, the source is played from the first In point to the last Out point, including the In and Out points for video. [Ctrl] + [Space] |
*1 Each press of [J] on the keyboard switches the rewind speed in 6 levels between 2 to 32 times. Press [L] to slow down the rewind speed. Press this key with the source paused to play back at the same speed in the reverse direction.
*2 Each press of [L] on the keyboard switches the fast-forward speed in 6 levels between 2 to 32 times. Press [J] to slow down the fast-forward speed. Press it while pausing to play back at the same speed in the forward direction.
*3 Loop playback cannot be set for external sources. [Loop] is replaced with [Pause].
|
|
|---|
|
You can play back a source by dragging the shuttle or slider on the Player.
|
|
|---|
|
1) Drag the shuttle/slider.
A frame at the slider position is displayed on the Player.
|
(1) |
Shuttle |
Drag the shuttle to the left and right to play back in the reverse and forward directions, respectively. Release dragging to return the shuttle to the center and pause playback. The playback speed can be selected in 21 levels both in the forward and reverse directions, from 1/20 to 16 times. |
|
(2) |
Slider |
Click any position on the position bar to move the slider and display the frame for that position. You can also drag the slider. |
|
(3) |
Position bar |
Displays the timeline of the source displayed on the Player. |
|
(4) |
[Switch Display Range] |
Switch the display range on the Player between In and Out points only or the entire source. |
Alternative
Shuttle (fast forward): [Ctrl] + [L]
Each press of [Ctrl] + [L] on the keyboard switches the fast-forward speed in 12 levels from 1/16 to 32 times. Press [Ctrl] + [J] on the keyboard to slow down.
Shuttle (rewind): [Ctrl] + [J]
Each press of [Ctrl] + [J] on the keyboard switches the rewind speed in 12 levels from 1/16 to 32 times. Press [Ctrl] + [L] on the keyboard to slow down.
You can play back a source by moving the mouse on the Player.
|
|
|---|
|
1) Position the mouse cursor on the Player, and move the mouse as if to draw a circle, with the right mouse button clicked.
Draw the circle clockwise to playback in the forward direction, and counterclockwise in the reverse direction. The playback speed changes in proportion to the speed of the mouse action.
Alternative
Place the mouse cursor on the Player, and rotate the mouse wheel.
Display clips registered to the bin or clips displayed in the source browser on the Player.
|
|
|---|
|
1) Select a clip in the clip view, and click [Show in Player] in the bin or in the source browser.
Bin
Source browser
2) Click [Play] on the Player.
Alternative
Drag a clip, and drop it onto the Player screen.
Right-click a clip and click [Show in Player].
Double-click a clip.
Select a clip, and press [Enter].
