Replace the audio module

The top cover and video I/O module are removed.
DANGER
To avoid serious injury from high currents, ensure that both power cords are disconnected prior to removing or replacing any parts.

  1. Remove audio module I/O ribbon cable.
  2. Remove the 14 self-tapping screws.
  3. Grasp the audio module on each side and pull straight up until free of the chassis.
Parent topic: About removing and replacing Field Replaceable Units
Related topics:
Remove the GV Director Server top cover
Replace the video I/O module

Copyright © 2014 Grass Valley. All rights reserved. GV Director gvtp_20141023_16:10:19