Replace the video riser card

  • The top cover is removed.
  • The video I/O module is removed.
DANGER
To avoid serious injury from high currents, ensure that both power cords are disconnected prior to removing or replacing any parts.

  1. Remove the card mounting screw.
  2. Pull the PCI express retaining tab away from the riser card and hold it in the released position.
  3. Lift the video I/O riser card straight up.
Parent topic: About removing and replacing Field Replaceable Units
Related topics:
Remove the GV Director Server top cover
Replace the video I/O module

Copyright © 2014 Grass Valley. All rights reserved. GV Director gvtp_20141023_16:10:19