Installing software on a GV STRATUS Express server

Only systems with a single GV STRATUS Express server require this process. Use SiteConfig to install software on the server.

1. Verify the SiteConfig roles currently assigned to the server. If the roles are not correct for your system design, add or remove roles accordingly. Roles are as follows:
   • GV STRATUS Ingest Services (Required)
   • GV STRATUS Control Panel Service (Required)
   • GV STRATUS Common Services (Required)
   • License Manager (Required)
   • GV STRATUS Data Mover Engine (Required)
   • GV STRATUS Proxy Express Server (Required on Express server)
   • GV STRATUS Control Panel (Required)
   • GV STRATUS Core Services (Required)
   • GV STRATUS Summit MDI (Required)
   • GV STRATUS Diva MDI (Optional)
   • GV STRATUS Event Viewer
   • GV STRATUS FlashNet MDI (Optional)
   • GV STRATUS Generic FTP MDI (Optional)
   • GV STRATUS Proxy Encoder (Optional)
   • GV STRATUS Workflow Engine (Required. Must be assigned to Express/Core server or to dedicated Workflow Server)
   • GV STRATUS Rules Engine (Required. Must be assigned to Express/Core server or to dedicated Workflow Server)
   • GV STRATUS Xcode Control Engine (Required. Must be assigned to Express/Core server or to dedicated Workflow Server)
   • GV STRATUS Traffic Gateway (Optional)
   • GV STRATUS Rundown Server Components (Optional)
   • GV STRATUS Application (Use for test purposes only)
2. Add the server to a deployment group, such as the GV STRATUS deployment group.
3. Add the following files to the deployment group:
   • GrassValley_CoreServer_x.x.x.cab, which contains the following cab files that apply to this device:
     • GrassValley_STRATUS_IngestServices_x.x.x.cab
     • GrassValley_STRATUS_ControlPanelService_x.x.x.cab
     • GrassValley_STRATUS_CommonServices_x.x.x.cab
     • GrassValley_STRATUS_CoreServices_x.x.x.cab
     • GrassValley_STRATUS_ControlPanel_x.x.x.cab
     • GrassValley_STRATUS_HttpProxyServer_x.x.x.cab
     • GrassValley_STRATUS_DataMover_x.x.x.cab
     • GrassValley_STRATUS_DIVA_MDI_x.x.x.cab
     • GrassValley_STRATUS_GVEventViewer_x.x.x.cab
     • GrassValley_STRATUS_FlashNet_MDI_x.x.x.cab
     • GrassValley_STRATUS_GFTP_MDI_x.x.x.cab
     • GrassValley_STRATUS_Summit_MDI_x.x.x.cab
     • GrassValley_STRATUS_Proxy_Encoder_x.x.x.cab
     • GrassValley_STRATUS_Mediaflow_Engine_x.x.x.cab
     • GrassValley_STRATUS_Rules_Engine_x.x.x.cab
     • GrassValley_STRATUS_Transcode_Engine_x.x.x.cab
     • GrassValley_STRATUS_TrafficGateway_x.x.x.cab
     • GrassValley_Sabretooth_Application_x.x.x.cab
     • GV_STRATUS_Rundown_x.x.x.cab
   • GrassValley_STRATUSClient_x.x.x.cab, which contains the following cab files that apply to this device:
     • GrassValley_STRATUS_ControlPanel_x.x.x.cab
     • GrassValley_STRATUS_Application_x.x.x.cab (Use for test purposes only)
     • x
   Refer to release notes for version numbers.
4. Do the SiteConfig Check Software operation on the server.
   Note: If an "Unable to copy ... to target" error appears for a device that has the Grass Valley Embedded Security solution, apply the Embedded Security solution one-time initial deployment process to the device. After the one-time process is complete the error does not appear and it is no longer necessary to put Embedded Security in Update mode.
5. Verify that deployment tasks are set to Install for the files listed above. If a WFRegMon install task appears, install it as well. It is required to support Grass Valley software installers. There is no uninstall task.
6. Deploy software to the server.
7. Restart as prompted.