| Channel |
The name of the GV I/O channel. |
| Channel Type |
The Channel Type selected is Record
for the GV I/O Live Ingest and Playout Server.
Note: The GV STRATUS
desktop application needs to be restarted after changing
a GV I/O channel type from Playout to Record or from
Record to Playout in order to see updated configuration
options in the Channel Panel tool.
|
| Channel Input |
Input signal type that has been connected to the channel at the GV I/O Live Ingest and Playout Server. Available input signals are in the
list below:
- Unassigned - The channel input is set to this initial setting
by default. No other settings are configurable when this
option is selected.
Note: Changing a channel's I/O configuration to
Unassigned will set channel configuration
information to a default state and release any
SabreTooth licenses associated with the
channel.
- SDI - Configures the channel to use SDI input. Requires the
GVIO-HW-CORVID88 hardware configuration and GVIO-SVR-SDI
license per channel.
- SMPTE 2110 - Configures the channel to use 10/25GigE SFP input
and allows for SDP file import. Requires the GVIO-HW-CX5
hardware configuration and GVIO-SVR-IP license per
channel.
- SMPTE 2022-6 - Configures the channel to use 10/25GigE SFP
input and allows for a single RTP URL entry of the form
rtp://ip_address:port_number
as described below.
- ip_address : The
multicast IP address of the SMPTE 2022-6 media
stream to be recorded
- port_number : The UDP
port configured for the media stream
For example,
“rtp://239.100.100.1:10000”.
Requires the
GVIO-HW-CX5 hardware configuration and GVIO-SVR-IP
license per channel.
- Web Stream - Configures the channel to use 10GigE RJ45 input
and allows for a single RTP URL entry of the form
rtp://ip_address:port_number
as described below.
- ip_address : The
multicast IP address of the media stream to be
recorded
- port_number : The UDP
port configured for the media stream
For example,
“rtp://239.100.100.1:10000”.
Requires the
GVIO-HW-CX5 hardware configuration and GVIO-SVR-WEB
license per channel.
|
| Label |
The label of the GV I/O channel. |
| Receiving IP |
For a channel configured for SMPTE 2110 or SMPTE 2022-6 input signal type, enter the
IP address that goes with the SFP connector used to receive the
media stream. |
| Enable 2022-7 Redundancy |
Select this box to enable redundancy of ingests. This is only applicable when SMPTE
2110 is selected for the Channel Input. |
| 2022-7 Receiving Interface |
When the enable 2022-7 redundancy check-box is selected, a 2022-7 Receiving Interface
(IP address) is also required, and it represents the IP address
of a second GV I/O input as the backup. |
| Update SDP File |
Select the location to import the SDP file from. This is only applicable to SMPTE
2110 option as it requires an import of data from a .sdp file
for the GV I/O configuration. Upon updating the .sdp file and
clicking Save, or after clicking
another SMPTE 2110 channel, the field becomes blank and does
not display the existing SDP file configuration.
|
| IP Stream / Web Stream |
Enter the URL in the form of
rtp://ip_address:port_number
as described for SMPTE 2022-6 or Web Stream in the Channel Input
description above. |
| Channel Format |
Select a format for the channel from the
drop-down list. Available formats are as configured in Format
settings in the GV STRATUS Control Panel. The setting determines the video
format expected at the GV I/O channel’s input. This setting also
determines the video codec used to compress the video while
recording. |
| Audio Tracks |
Select the number of
audio tracks supported for recordings via the channel. You can
select up to 16 audio tracks for each channel. |
