Configuring Grass Valley Media Server MDI settings: Required for standalone
If you received your system pre-configured from Grass Valley, your Grass Valley Media Server MDI settings are already configured so you can skip these tasks. Otherwise, work through this section sequentially to configure your Grass Valley Media Server MDI settings.
To locate these settings, click Core | MDI Configuration | Add | Grass Valley Media Server
- In the Control Panel application, open Grass Valley Media Server MDI Configuration settings.
-
Configure one Summit MDI for each standalone K2 Summit system on
your
GV STRATUS
system.
When you have multiple Grass Valley Media Server MDIs, they must each have their own process port number. For this purpose, numbers 9160 - 9169 increment in the Port field.
-
Configure as follows:
- Click Save.
-
If you changed a standalone MDI
setting, you must restart the GV STRATUS Core server system and the K2 Summit or GV I/O system. If
SAN MDI settings, you must restart the entire K2 SAN system, including K2
Media Servers, attached K2 Summit systems, and other SAN clients.
If you are changing multiple Grass Valley Media Server MDI settings, you can make all those settings first before restarting these systems. Restarting the systems once is sufficient for multiple Grass Valley Media Server MDI settings changes. - Repeat steps to configure an MDI for each standalone K2 Summit system on your GV STRATUS system.