Depending on formats and the application triggering a conform job, the resultant simple
clip can have different specifications.
When a source complex asset (sequence or list) is conformed, the conform job
falls into one of the following categories:
- Same-format:
- The source format is the same for all clips in the complex asset AND the
destination format to which the asset is conformed is also that same
format.
- Mixed-format:
- The source format is the same for all clips in the complex
asset AND the destination format to which the asset is conformed is a different
format.
- -OR-
- There are at least two different source formats in the
complex asset.
Formats include SD, 720p, and 1080i.
The following are examples:
- When a source sequence or list with multiple SD clips is conformed to a
simple SD clip, it is a same-format conform job.
- When that same source sequence or list with multiple SD clips is
conformed to a simple 720p (HD) clip, it is a mixed-format conform job.
- When a source sequence or list with at least one 720p clip and at least
one 1080i clip is conformed, it always a mixed-format conform job, regardless of the
destination format to which it is conformed.
| |
Same-format job |
Mixed-format job |
| Ancillary data |
Inherited |
Inherited from source formats that are the same as the
destination format.
Dropped
in these conditions below:
- When conforming from progressive to interlace or vice
versa.
- When conforming from 4:3 to 16:9 aspect ratio format or
vice versa.
- When conforming to multiple destinations with different
format for each destination.
|
| Start timecode |
Configured according to the selection of Restripe
timecode option in Locations Config |
K2-Send Destinations settings in the GV STRATUS Control Panel.
- When the Restripe timecode check-box is not selected, the start
timecode of the conformed clip is preserved according to
the original timecode.
- When the Restripe timecode check-box is selected, the start
timecode of the conformed clip is set according to EDIUS
Start Timecode setting in
GV STRATUS Control Panel.
|
Configured in the EDIUS Start Timecode
setting in the GV STRATUS Control Panel. |
| Marker timecode |
Configured according to the selection of Restripe
timecode option in Locations Config |
K2-Send Destinations settings in the GV STRATUS Control Panel.
- When the Restripe timecode
check-box is not selected, the marker timecode of the
conformed clip is preserved according to the original
timecode.
- When the Restripe timecode check-box is selected, the marker
timecode on the conformed clip is shifted according to
its position from the new start timecode as configured
in EDIUS Start Timecode setting
in GV STRATUS Control Panel.
|
Configured to new marker timecode from the new start timecode according to EDIUS
Start
Timecode setting in the GV STRATUS Control Panel. |
| Audio tags |
Inherited |
Inherited |
