Other Topic Library Versions

Creating a new sequence in the EDIUS application

You can create a new sequence in the EDIUS for GV STRATUS application from the Assignment List. The new sequence appears in the EDIUS as a new project. This enables further editing to be done using EDIUS before sending your sequence for playback. The sequence which is automatically linked to a placeholder can then easily be sent to the K2 system from the EDIUS application.

The New Project in EDIUS button is only available if you are assigned with the EDIUS XS role in the GV STRATUS Control Panel and the EDIUS application must be installed on your machine.

  1. Select a placeholder in the Assignment List.

  2. Do one of the following:
    • Click the New Project in EDIUS button.
    • Right-click on the placeholder and select New Project in EDIUS.
    Note: The sequence is automatically linked to a placeholder if the sequence is launched from the Assignment List panel.

    The Open dialog appears.

  3. Select the project location.

    You can also set to other locations as long as the new location is under the default location path in EDIUS settings on the GV STRATUS Control Panel.

  4. Enter the project name and click Open.

    The EDIUS application opens with the new project on the timeline.

After creating the project on the EDIUS timeline, you can add assets to the sequence.

Copyright © 2019 Grass Valley Canada. All rights reserved. GV STRATUS 6.8 gvtp_20190318_01:43:25