[ Table ]
Menu item | Action | ||
New | Single Bus | Opens a new Single bus window with destination 1 selected. | |
Matrix View | Opens a new Matrix View window. | ||
Status View | Opens a window showing the router status. | ||
Configuration | Salvo Editor | Invokes the configuration mode Salvo editor window. | |
Exclusion Editor | Invokes the configuration mode Exclusion editor window. | ||
Group Editor | Invokes the configuration mode Group editor window. | ||
Settings | Status Bar | On | Displays status bar. |
Off | Hides status bar. | ||
Sound | On | Enables sound effects. | |
Off | Disables sound effects. | ||
Autolock | On | Shows an enlarged version of the source and destination labels under the cursor tip, useful when the displayed labels are very small | |
Off | Disables the supplementary label display. | ||
Preset | On | Enables presets. The new selection appears in the Preset area, and is set at the output when the Take button is clicked. The take is inhibited if any exclusions are violated, or if the selected destination is locked. | |
Off | Disables presets. The Preset area is dimmed. All selected outputs switch immediately to the source selected on the button in the left panel. | ||
Chop interval | No auto chopping | Disables autochopping | |
Set chop interval to 0.5s | Changes chop interval to 0.5 seconds | ||
Set chop interval to 1s | Changes chop interval to 1 second | ||
Set chop interval to 1.5s | Changes chop interval to 1.5 seconds | ||
Set chop interval to 2s | Changes chop interval to 2 seconds | ||
Set chop interval to 2.5s | Changes chop interval to 2.5 seconds | ||
Set chop interval to 3s | Changes chop interval to 3 seconds | ||
Set chop interval to 10s | Changes chop interval to 10 seconds | ||
Set chop interval to 30s | Changes chop interval to 30 seconds | ||
Windows | Contains a list of open windows. Selecting an entry will bring it to the front. | ||
Close | Closes current window. If the window is the last one open – then exit. | ||