Check all currently installed software on GV STRATUS Rundown devices
Prerequisites for this task
are as follow:
- The device must be assigned in the SiteConfig system description and network connectivity must be present.
- SiteConfig must be able to log in to the device using the username/password credentials assigned to the device.
- The SiteConfig PC must not have a network drive mapped to an administrative share (such as C$) on a device on which you are checking software.
- If Aurora product software at a version lower than 6.5.2 is currently installed, it must be manually uninstalled. For more information refer to SiteConfig Migration Instructions.
-
In the
Software
Deployment | Deployment Groups tree view, right-click the top-most
node for the group or any individual device and select
Check
Software.
Note: If you have access problems, verify that the administrator account on the device has credentials as currently configured in SiteConfig.Note: If an "Unable to copy ... to target" error appears for a device that has the Grass Valley Embedded Security solution, apply the Embedded Security solution one-time initial deployment process to the device. After the one-time process is complete the error does not appear and it is no longer necessary to put Embedded Security in Update mode.The Check Software dialog box appears. SiteConfig searches for software on the selected device or devices and gathers information. Progress is reported.
- When the check is complete, close the Check Software dialog box.