Creating a new file system - Proxy Storage
- If you have not already done so, launch Storage Utility from the K2Config application.
- As prompted, wait while Storage Utility gathers system information, then Storage Utility opens.
-
In Storage Utility, click
Tools | Make New File System.
The Setting dialog box opens.
- For a Proxy Storage system, enter zero as the Real Time Input/Output (RTIO) rate.
- Leave Windows Security unchecked.
-
Click
OK.
The Configuration File dialog box opens.
The configuration file for the media file system is displayed. - Verify media file system parameters. Do not edit the configuration file for the media file system.
- Click Accept. A “…Please wait…” message box displays progress and a “…succeeded…” message confirms the process is complete. A message informs you that you must restart the server, however the restart at the end of the Configure K2 Server wizard suffices, so you do not need to restart now.
-
Close the Storage Utility.
Note: Do not attempt to start SAN-attached systems or otherwise bring the SAN online until instructed to do so by the documented procedure.