K2 SAN prerequisites for adding devices
The following K2 SAN preparations are required to
support adding a device to the SAN:
- All K2 Media Servers and/or K2 RAID storage devices must be installed and cabled.
- The control network must be operational with K2 devices communicating. At the command prompt, use the ping command to verify.
- The media network (non-redundant) or networks (redundant) must be operational. You can check this with the K2Config application.
- K2 RAID devices must have disks bound and be configured as required for operation on the K2 SAN.
- K2 Media Servers must be configured such that an operational media file system is present.
- K2 Ethernet switches must be configured and have V-LANs set up.
- The K2 Media Server with role of file system server must be licensed as appropriate for the design of your K2 SAN.