Send Destination Add/Modify settings
These settings are optional on GV STRATUS systems.
To locate these settings, click General | Locations Config | K2 - Send Destinations | Add or Modify
| Setting or button | Description |
|---|---|
| Send Name | The name of the destination, as it appears in the Send Destinations list in the GV STRATUS application. This can be any name, as appropriate for your workflow. |
| K2 | The destination system to which
the asset is sent. If the destination is a K2 Summit/SAN system, it must be configured in K2 Storage , K2 SAN Storage, K2 Standalone Storage, or Remote K2 Storage settings. If the destination is specified to use a separate FTP network (typically designated with the _he0 suffix), that FTP network must be accessible when configuring these settings. If the destination is not a K2 Summit/SAN system, Non-Summit device must be selected. |
| Conform on Send | Triggers the Render Engine software component to render a complex asset as a simple clip. It is recommended that the Send Name indicate that the destination is configured for conform. |
| Non-Summit device | Identifies the destination system as one on
which K2 Summit/SAN services are not running. When selected, an
Enter working
bin field opens. This is the bin on the destination
system to which the asset is sent. The bin name must be entered
manually, as only systems running K2 Summit/SAN services can
populate a list of available bins/directories. Note: When this
option is selected, the settings applied for the destination
system name and working bin name must be valid and accessible on
the network. The GV STRATUS system does not attempt to validate
the settings and does not provide any messages if not valid when
applied.
|
| Select a working bin | The bin on the selected K2 system to which the asset is sent. This list of available bins does not appear if Non-Summit device is selected. |