Other Topic Library Versions

Re-synchronize physical disk from RDR virtual disk

Disks whose synchronization by RDR is cancelled for reasons including a failure can be re-synchronized using the following procedure:

  1. Start the RDR Utility and right-click a target disk in the left pane and click Resynchronize This Physical Disk From RDR Virtual Disk.
  2. In the Resynchronize This Physical Disk From RDR Virtual Disk dialog box, click OK.
  3. Confirm that the re-synchronization starts and the status of disks changes as shown below:
    Resynchronizing DISK ACCESS LED RDR Utility
    Op State: State Status
    Source disk Amber (Blinking) Simplex N/A
    Destination disk Amber (Blinking) Syncing N/A
    RDR Virtual disk N/A Simplex Resync x percent

    (x=0, 4, 8, ..., 96)

    Synchronization completed DISK ACCESS LED RDR Utility
    Op State: State Status
    Source disk Green (blinking) Duplex N/A
    Destination disk Green (blinking) Duplex N/A
    RDR Virtual disk N/A Duplex None
Parent topic: Dual disk configuration overview

Copyright © 2015 Grass Valley USA, LLC. All rights reserved. GV STRATUS 3.5 gvtp_20150216_19:49:26